CABAC
Technical Data
Material: Ethylene-Vinyl Acetate
Adhesion: 0.25kg per cm2
Colour: White
Thickness: Approx 1mm
Width: 18mm
Length: 10m
Technical Data
Material: Ethylene-Vinyl Acetate
Adhesion: 0.25kg per cm2
Colour: White
Thickness: Approx 1mm
Width: 12mm
Length: 10m
- Air-conditioning ducts
- Wide insulation tape
- Packing tape
Technical Data
Dimensions: 48mm x 30m Roll
Colour: Black
- Air-conditioning ducts
- Wide insulation tape
- Packing tape
Technical Data
Dimensions: 48mm x 30m Roll
Colour: Grey
SAT1-RD Features
- Offers superior heat and weather resistance
- Superior stability of tensile strength and elongation
Applications
- Protecting electric cable joint insulation
- Insulation banding for wire harness in the engine area of car
Technical Data
Total Thickness: 0.5mm
Colour: Red brown
Tensile at Break: 70 N/19mm
Elongation at Break: 660%
Self-Fusing Force: 39 N/19mm
Breakdown voltage: 20 kV
Use CABPRO MEGA 45 for quick identification of electrical circuits, containers, and conduit systems, as well as primary insulation for splices at not more than 600 volts. UL 510, CAS 22.2 (rated from - 18 deg C), VDE.
CABPRO MEGA 45 Features
- 0.18mm thickness
- Cold and weather resistant
- Flame retardant
- High dielectric strength
- Highly elastic
- Highly conformable
- High UV resistance
- Highly resistant to sun, water, oil, acids, alkalies, corrosive chemicals
- Lead-free
Quick identification of electrical phases, circuits, feeders and branches. Also can be used to identify container contents, marking of piping and conduit systems and as a warning tape. Primary insulation for splices up to 600 volts. Can be used at all low temperatures applications.
Technical Data
Dimensions: 19mm x 20m x 0.18mm
Colour: Yellow
Use CABPRO MEGA 45 for quick identification of electrical circuits, containers, and conduit systems, as well as primary insulation for splices at not more than 600 volts. UL 510, CAS 22.2 (rated from - 18 deg C), VDE.
CABPRO MEGA 45 Features
- 0.18mm thickness
- Cold and weather resistant
- Flame retardant
- High dielectric strength
- Highly elastic
- Highly conformable
- High UV resistance
- Highly resistant to sun, water, oil, acids, alkalies, corrosive chemicals
- Lead-free
Recommended Uses
Quick identification of electrical phases, circuits, feeders and branches. Also can be used to identify container contents, marking of piping and conduit systems and as a warning tape. Primary insulation for splices up to 600 volts. Can be used at all low temperatures applications.
Technical Data
Dimensions: 19mm x 20m x 0.18mm
Colour: Red
CABPRO 2710 Features
- 0.18mm thickness
- Flame retardant
- Lead-free
- Resistant to sun, water, oil, acids, alkalies, corrosive chemicals
Recommended Uses
Used for general splicing purposes. Can be used as primary insulation for splices up to 600 volts and provides a protective outer jacket for splices at higher voltages. Can be used for wrapping wire harnesses and insulating degaussing coils. Colours can be used for colour coding electrical circuits.
Technical Data
Dimensions: 18mm x 20m x 0.18mm
Colour: Yellow
CABPRO 2710 Features
- 0.18mm thickness
- Flame retardant
- Lead-free
- Resistant to sun, water, oil, acids, alkalies, corrosive chemicals
Recommended Uses
Used for general splicing purposes. Can be used as primary insulation for splices up to 600 volts and provides a protective outer jacket for splices at higher voltages. Can be used for wrapping wire harnesses and insulating degaussing coils. Colours can be used for colour coding electrical circuits.
Technical Data
Dimensions: 18mm x 20m x 0.18mm
Colour: Red
The CABPRO 2710 is a 0.18mm professional grade, weather resistant, pressure sensitive vinyl tape for all kinds of mechanical and electrical applications. CABPRO 2710 is flame retardant and can be used as primary insulation for splices up to 600 volts. UL 510, CSA 22.2 Lead-free.
CABPRO 2710 Features
- 0.18mm thickness
- Flame retardant
- Lead-free
- Resistant to sun, water, oil, acids, alkalies, corrosive chemicals
CABPRO 2710 Features
- 0.18mm thickness
- Flame retardant
- Lead-free
- Resistant to sun, water, oil, acids, alkalies, corrosive chemicals
Recommended Uses
Used for general splicing purposes. Can be used as primary insulation for splices up to 600 volts and provides a protective outer jacket for splices at higher voltages. Can be used for wrapping wire harnesses and insulating degaussing coils. Colours can be used for colour coding electrical circuits.
Technical Data
Dimensions: 18mm x 20m x 0.18mm
Colour: Blue
CABPRO 2710 Features
- 0.18mm thickness
- Flame retardant
- Lead-free
- Resistant to sun, water,oil,acids, alkalies, corrosive chemicals
Recommended Uses
Used for general splicing purposes. Can be used as primary insulation for splices up to 600 volts and provides a protective outer jacket for splices at higher voltages. Can be used for wrapping wire harnesses and insulating degaussing coils. Colours can be used for colour coding electrical circuits.
Technical Data
Dimensions: 18mm x 20m x 0.18mm
Colour: Black
6x Australian and New Zealand power outlets each with an individual switch
Surge and overload protection
EMI and RFI protection
2m power lead with right angled plug
The crimp achieves a roll crimp that supports the insulation and crimps the wire.
This type of crimper is not suitable for flag terminals.
Featuring a spring opening action.
> Designed to crimp the large end of the bootlace range
> Ratchet controlled for crimp consistency
> Serrated crimp surface creating an enhanced grip
The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, creating a square crimped pin with serrations. This action creates a self-adjusting tool, which crimps over a large range. To crimp, simply insert the ferrule and squeeze the handles, and the tool does the rest. The tool is ratchet controlled for crimp consistency, and the ratchet has 9 adjustment positions, to compensate for tool wear.
NOTE: Please ensure this tool is well oiled to ensure correct operation.
They feature a serrated nose grip and beveled side-cutting blades.
Note: This product has been tested for working at voltages up to 1000V. To be in compliance with the standard IEC 60900, Clause 5.5 - Dielectric tests.
Testing requires tools are subjected to 10 000V. Products are designed and manufactured to conform to the requirements of the standard AS/NZS 4056.
- Handles are made from two materials, which provide a soft grip, with a sturdy handle.
- The blade is made from high-grade alloy steel
- The range can be purchased individually or in sets
Standards Compliance
- Designed, tested and compliant to VDE, GS and the EN/IEC60900 standard for full 1000V protection
- The test process for these screwdrivers is a 10,000V immersion test in a water bath as part of the manufacturing process. At this voltage there must be insignificant current leakage, or tracking
Technical Data
Head Size: #2
Shaft Length: 100mm
Overall Length: 215mm
Weight: 97g