Dimmers
S-Premium Rotary Digital Dimmer for Dimmable LED Lighting
The S-Premium HNS636DT digital dimmer is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS636DT provides deep-dimming to zero on most lamps. A separate switch is required for ON/OFF control.This 2-wire rotary dimmer features programmable minimum brightness, patented ripple tone rejection has the advantage of being suitable for dual switching. This makes our HNS636DT the perfect choice for dimmable LED lighting.
Applications and Compatibility
Suggested uses include incandescent, Dichroic 12V, CFL and most dimmable lighting. Compatible with S-Click 3-Wire Timers and Switches.
The HNS636DT is suitable for dual switching.
Knobs included to suit Clipsal Saturn and Saturn Zen wall plates.
The HNS636DT is designed for indoor use. It is not rated for outdoor installation. NOT SUITABLE FOR FANS AND MOTORS.
Operating Conditions
Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS636DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.
The HNS020RB is suitable for use with S-Click Digital Dimmer Switches, 3-Wire Timer Switches and 3-Wire Electronic ON/OFF Switches. Multiple Remote Buttons can be connected in parallel to a single dimmer or switch, provided that the total length of the remote connection does not exceed 50 metres.
Applications and Compatibility
The HNS020RB is designed for indoor use and is not rated for outdoor installation. Buttons to suit both Clipsal and HPM Style wall plates are included.
Compatible S-Click Dimmers: HNS610DT and HNS620DT
Compatible S-Click 3-Wire Timers: HNS440TM and HNS450TM
Compatible S-Click ON/OFF Mechs: HNS460SW
Note: Not for Mains Switching.
Operating Conditions
Operating Voltage: 220-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Compliance Standards: AS/NZS 60669.2.1, CISPR15
Power Rating: Based upon connected Dimmer or Timer
LED Indicator Colour: White
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS020RB is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product user manual.
The S-Click HNS630DT digital dimmer is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS630DT provides deep-dimming to zero on most lamps. A separate switch is required for ON/OFF control.
This 2-wire rotary dimmer features programmable minimum brightness, patented ripple tone rejection and has the advantage of being suitable for dual switching. This makes our HNS630DT the perfect choice for dimmable LED lighting.
Applications and Compatibility
Suggested uses include incandescent, Dichroic 12V, CFL and most dimmable lighting. Compatible with S-Click 3-Wire Timers and Switches.
The HNS630DT is suitable for dual switching.
Knobs included to suit Clipsal and HPM style wall plates. Also suitable with PDL 600 Series, use our adaptor HNSPDLCONV.
The HNS630DT is designed for indoor use. It is not rated for outdoor installation. NOT SUITABLE FOR FANS AND MOTORS.
Operating Conditions
Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS630DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.
S-Click Rotary Digital Dimmer with Built-In ON/OFF Switch
The HNS620DT dimmer switch is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS620DT provides deep-dimming to zero on most lamps. This versatile 2-in-1 unit also provides push-button ON/OFF control and is the perfect solution for dimmable LED lighting and dimmable compact fluorescent lamps.The HNS620DT is equipped with timed dimming, a convenient bonus feature that automatically dims or brightens lighting. A double tap while lighting is ON will gradually dim lighting over 30 minutes before turning off. Conversely, a double tap when lighting is off will gradually increase brightness to full over 30 minutes. The LED indicator will blink every 5 seconds during timed dimming. The countdown can be cancelled at any time with a sustained 2-second press of the button.
Applications and Compatibility
The HNS620DT is designed for indoor use. It is not rated for outdoor installation. Suggested uses include LED & CFL lighting. NOT SUITABLE FOR FANS AND MOTORS.
For Multi-way dimming and ON/OFF, use the HNS020RB Remote Button.
Knobs included to suit CABAC, Clipsal and HPM style wall plates. Also suitable with PDL 600 Series, use our adaptor HNSPDLCONV.
Operating Conditions
Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS620DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.
- 1