Hand Crimpers
Cabac Die-Less Bootlace Crimper 0.08-10Mm2 HNKE10 (HNKE10)
The HNKE10 tool is the mid range tool in the die-less tool range, covering 0.08 to 10mm2.
The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, creating a square crimped pin with serrations. This action creates a self-adjusting tool, which crimps over a large range. To crimp, simply insert the ferrule and squeeze the handles, and the tool does the rest. The tool is ratchet controlled for crimp consistency, and the ratchet has 9 adjustment positions, to compensate for tool wear.
NOTE: Please ensure this tool is well oiled to ensure correct operation.
The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, creating a square crimped pin with serrations. This action creates a self-adjusting tool, which crimps over a large range. To crimp, simply insert the ferrule and squeeze the handles, and the tool does the rest. The tool is ratchet controlled for crimp consistency, and the ratchet has 9 adjustment positions, to compensate for tool wear.
NOTE: Please ensure this tool is well oiled to ensure correct operation.
CABAC BOOTLACE CRIMPER 16-35MM2 (HNKE7)
Ratchet crimper for crimping bootlace ferrules (BLP) and uninsulated sleeves 16-35 mm2.
> Designed to crimp the large end of the bootlace range
> Ratchet controlled for crimp consistency
> Serrated crimp surface creating an enhanced grip
> Designed to crimp the large end of the bootlace range
> Ratchet controlled for crimp consistency
> Serrated crimp surface creating an enhanced grip
CABAC BOOTLACE CRIMPER 0.5-2.5MM2 PLIER STYLE (HNKE6)
Low cost manual plier type crimper for bootlace ferrules (BLP) and uninsulated end sleeves 0.5-2.5 mm2.
Featuring a spring opening action.
Featuring a spring opening action.
COMBINATION HAND CRIMPER 1.5-16MM2 K26 (K26)
Low cost ratchet crimper crimps copper lugs and uninsulated terminals 1.5-16 mm2. A ratchet operation ensures correct crimp and a 'W' crimp for large crimp range.
BRASS TERM CRIMPER 0.75-6MM2 ROLL CRIMP (HF2)
This low cost brass terminal crimper is designed to crimp quick connectors type (QCB or MTB type) 0.75 - 6mm2.
The crimp achieves a roll crimp that supports the insulation and crimps the wire.
This type of crimper is not suitable for flag terminals.
The crimp achieves a roll crimp that supports the insulation and crimps the wire.
This type of crimper is not suitable for flag terminals.
Combination Non-Ratchet Crimper 1.5-6Mm2 (K10/3)
CABAC Combination Non-Ratchet Crimper 1.5-6Mm2
Low cost combination crimp tool for pre-insulated red, blue and yellow terminals, copper lugs and un-insulated terminalsIncludes cutter, bolt cutter and wire stripperSize: 1.5-6mm2For the handyman NOT for quality electrical installations
WATERPROOF CONNECTOR CRIMPING TOOL (FCOMT1)
The waterproof connector crimping tool is designed to compress F Connectors RG59/6/11 onto cables such as BNC, F, RCA, RG6, RG59, Quad/11 and mini coax cables.
Waterproof Connector Crimping Tool Features
- Universal design, creates a permanent termination
- Effortless one step operation is accomplished in a single action giving a professional cost effective solution
- Fits in the palm of your hand
- No adjustments are required
- Strong, lightweight construction
- Great for home theatre, CATV, SAT and security installations
Waterproof Connector Crimping Tool Features
- Universal design, creates a permanent termination
- Effortless one step operation is accomplished in a single action giving a professional cost effective solution
- Fits in the palm of your hand
- No adjustments are required
- Strong, lightweight construction
- Great for home theatre, CATV, SAT and security installations
Specifications
Cable: RG59/6
Compressed Distance: 19.7~20.3mm
Cable: RG11
Compressed Distance: 34.8~35.4mm
Technical Data
Length: 174mm
Weight: 384g
- 1