Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Mech Booster Relay 3-Wire HNS010RL
S-Click Mech Booster Relay 3-Wire 240V 10A HNS010RL (HNS010RL)
S-Click Mech Booster Relay 3-Wire 240V 10A HNS010RL

Used in conjunction with HNS440TM, HNS450TM or HNS460SW
Suitable for fans, motors and iron core ballasts
Can be normally open or normally closed
$87.38  Inc Tax
S-Click Remote Btn For Dimmers HNS020RB
S-Click Remote Btn For Dimmers And 3W Timers HNS020RB (HNS020RB)
Multiway switching provides another level of comfort and functionality for a range of spaces, including bedrooms, hallways and garages. S-Click Remote Buttons are a convenient and economical solution that provide multiway switching and dimming over standard wiring.

The HNS020RB is suitable for use with S-Click Digital Dimmer Switches, 3-Wire Timer Switches and 3-Wire Electronic ON/OFF Switches. Multiple Remote Buttons can be connected in parallel to a single dimmer or switch, provided that the total length of the remote connection does not exceed 50 metres.

Applications and Compatibility

The HNS020RB is designed for indoor use and is not rated for outdoor installation. Buttons to suit both Clipsal and HPM Style wall plates are included.

Compatible S-Click Dimmers: HNS610DT and HNS620DT
Compatible S-Click 3-Wire Timers: HNS440TM and HNS450TM
Compatible S-Click ON/OFF Mechs: HNS460SW

Note: Not for Mains Switching.

Operating Conditions

Operating Voltage: 220-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Compliance Standards: AS/NZS 60669.2.1, CISPR15
Power Rating: Based upon connected Dimmer or Timer
LED Indicator Colour: White
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS020RB is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product user manual.

$26.59  Inc Tax
S-Click 2-in-1 Programmable Light Switch Timer Mech
S-Click Minute Mech Timer 2-Wire 240V 1.7A HNS410TM (HNS410TM)
The S-Click HNS410TM is a 2-in-1 lighting timer switch that automatically turns lights off after a pre-determined time. Time delay can be set in minute increments from 1-60 minutes - perfect for areas that are frequently occupied for relatively short periods. Supporting both timer and non-timer functions, this unit also allows for lights to be manually turned off with a quick tap.

Our minute timer switch is ideal for domestic use and can be retrofitted to most installed lights. A blue LED indicates device status and gives an expiry warning within the last 10 seconds before the lights time-out. The timer settings are retained even after loss of power and can be configured to power up on or off after loss of mains power.

Programming your chosen off time couldn't be simpler. A sustained 10 second press of the button enters programming mode. Just tap the button once for each minute of run time you require, up to 60 minutes. Programming mode expires 10 seconds after the last tap, and the unit then commits your settings to memory. If you happen to press the button more than 60 times, the maximum run time of 60 minutes will be stored.

Applications and Compatibility

The HNS410TM is perfect for lighting in areas such as hallways, garages, laundries and wardrobes. All require adequate lighting but are generally not occupied for extended periods. Using a minute timer switch in these areas prevents the excess energy consumption caused by leaving lights on accidently.

The HNS410TM is compatible with HPM and Clipsal Style wall plates. Multi-way switching capable using 240V normally open momentary switches-refer to the product datasheet for more information.
Not suitable for fans, motors or iron core ballasts.

Operating Conditions

Operating Voltage: 230 - 240V a.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Compliance Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 400VA
Minimum Load: 10VA
Maximum Current capacity: 1.7A
Terminals: Screw Terminals suit 0.5mm2 to 1.5mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS410TM is to be installed as part of a fixed wire electrical installation. By law, such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product User Manual.

$98.65  Inc Tax
S-Click Wall Timer Switch 230Vac 10A HNS210TD
S-Click Wall Timer Switch 230Vac 10A HNS210TD (HNS210TD)
The S-Click HNS210TD Wall Timer Switch is a high current 10A timer switch suitable for a range of applications, including motor loads up to 8A. This unit has selectable operating modes that allow it to act as an ON/OFF timer switch or a restart timer switch as required.

The HNS210TD is configured using eight DIP switches, a quick and simple method that allows installers to tailor the timer function precisely to their client's needs. This unit supports a wide range of timer duration options, enabled by a switch which determines whether the time-out is set in long (4-minute) or short (15-second) increments. This means that timer duration can range from 15 seconds to over 4 hours. Another switch allows for the installer to select what action results when the button is pushed while the load is on. Using this setting, the HNS210TD can be programmed to restart the timer when the button is pushed during operation, thus extending the run time. Alternatively, the button can be programmed to turn off the load upon a subsequent push, cutting the run time short.

Applications and Compatibility

This timer is suitable for the majority of applications, but is particularly well suited for fan motors. The HNS210TD is multi-way switching capable, refer to the product Datasheet for further information.
Compatible with HPM and Clipsal style wall plates. Suitable push buttons are provided for a perfect fit.

Operating Conditions

Operating Voltage: 230 - 240V a.c. 50Hz*
Operating Temperature: 0 to +50 degrees Celsius
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 10AX
Timer Range: 15 seconds to 252 minutes
Timer Accuracy: +/- 10%
Terminals: Screw Terminals suit 1.5mm2 to 4.0mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
*Not suitable to be driven by a DC-AC inverter.

The HNS210TD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product User Manual.

$142.95  Inc Tax
$155.05
Push Btn Dig Dimmer S-Premium HNS616DT
Push Btn Dig Dimmer S-Premium 240V 350W HNS616DT (HNS616DT)

S-Premium Push Button Digital Dimmer and ON/OFF Switch

The S-Click HNS616DT is a push button digital dimmer and ON/OFF switch in one. Our rugged design features improved over current, over voltage and over temperature protection plus patented ripple tone rejection. Possible applications include dimmable LED & CFL lighting and multiway dimming.

The push button dimmer range is incredibly easy to use. A quick tap will turn lights ON or OFF at the last set brightness. A long press ramps brightness up or down, alternating with each press until the desired brightness is reached.

The HNS616DT is suitable for most dimmable lights, and is specifically designed for dimming LED lighting. The unit delivers deep dimming to zero on most lamps and multiway dimming is enabled using our HNS026RB Remote Button (sold separately).

Bonus Feature: Timed Dimming

A double tap while lighting is ON will activate timed dimming, a convenient bonus feature that gradually dims lighting over 30 minutes before turning off. Conversely, a double tap when lighting is off will gradually increase brightness to full over 30 minutes. The LED indicator will blink every 5 seconds during timed dimming. The countdown can be cancelled at any time with a sustained 2-second press of the button.

Operating Conditions

Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

NOT SUITABLE FOR FANS AND MOTORS

The HNS616DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and other information, refer to the User Manual.

$83.90  Inc Tax
Cabac S-Premium Rotary Digital Dimmer HNS636DT
Cabac S-Premium Rotary Digital Dimmer (Clipsal Saturn) HNS636DT (HNS636DT)

S-Premium Rotary Digital Dimmer for Dimmable LED Lighting

The S-Premium HNS636DT digital dimmer is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS636DT provides deep-dimming to zero on most lamps. A separate switch is required for ON/OFF control.

This 2-wire rotary dimmer features programmable minimum brightness, patented ripple tone rejection has the advantage of being suitable for dual switching. This makes our HNS636DT the perfect choice for dimmable LED lighting.

Applications and Compatibility

Suggested uses include incandescent, Dichroic 12V, CFL and most dimmable lighting. Compatible with S-Click 3-Wire Timers and Switches.

The HNS636DT is suitable for dual switching.

Knobs included to suit Clipsal Saturn and Saturn Zen wall plates.

The HNS636DT is designed for indoor use. It is not rated for outdoor installation. NOT SUITABLE FOR FANS AND MOTORS.

Operating Conditions

Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS636DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.

$92.80  Inc Tax
S-Click Rotary Dig Dimmer 2-Wire 240V 350V HNS630DT (HNS630DT)

The S-Click HNS630DT digital dimmer is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS630DT provides deep-dimming to zero on most lamps. A separate switch is required for ON/OFF control.

This 2-wire rotary dimmer features programmable minimum brightness, patented ripple tone rejection and has the advantage of being suitable for dual switching. This makes our HNS630DT the perfect choice for dimmable LED lighting.

Applications and Compatibility

Suggested uses include incandescent, Dichroic 12V, CFL and most dimmable lighting. Compatible with S-Click 3-Wire Timers and Switches.

The HNS630DT is suitable for dual switching.

Knobs included to suit Clipsal and HPM style wall plates. Also suitable with PDL 600 Series, use our adaptor HNSPDLCONV.

The HNS630DT is designed for indoor use. It is not rated for outdoor installation. NOT SUITABLE FOR FANS AND MOTORS.

Operating Conditions

Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS630DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.

$73.50  Inc Tax
Rotary Switch Dig Dimmer HNS620DT
Rotary Switch Dig Dimmer 2-W 240V 350V HNS620DT (HNS620DT)

S-Click Rotary Digital Dimmer with Built-In ON/OFF Switch

The HNS620DT dimmer switch is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS620DT provides deep-dimming to zero on most lamps. This versatile 2-in-1 unit also provides push-button ON/OFF control and is the perfect solution for dimmable LED lighting and dimmable compact fluorescent lamps.

The HNS620DT is equipped with timed dimming, a convenient bonus feature that automatically dims or brightens lighting. A double tap while lighting is ON will gradually dim lighting over 30 minutes before turning off. Conversely, a double tap when lighting is off will gradually increase brightness to full over 30 minutes. The LED indicator will blink every 5 seconds during timed dimming. The countdown can be cancelled at any time with a sustained 2-second press of the button.

Applications and Compatibility

The HNS620DT is designed for indoor use. It is not rated for outdoor installation. Suggested uses include LED & CFL lighting. NOT SUITABLE FOR FANS AND MOTORS.

For Multi-way dimming and ON/OFF, use the HNS020RB Remote Button.

Knobs included to suit CABAC, Clipsal and HPM style wall plates. Also suitable with PDL 600 Series, use our adaptor HNSPDLCONV.

Operating Conditions

Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS620DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.

$77.10  Inc Tax
S-Click Advanced Wall Timer Switch 3-Wire HNS220TD
S-Click Advanced Wall Timer Switch 3-Wire HNS220TD (HNS220TD)
The HNS220TD Advanced Wall Timer is a flexible, high current timer switch perfect for devices that are required to run for a fixed amount of time. This wall timer offers adjustable time-out ranging from 10 seconds to 15 hours, with easy and accurate programming using DIP switches. The HNS220TD can be used as a pool pump timer, exhaust fan timer, heater timer, or for a range of other high-power applications.

The HNS220TD can operate as a timer switch or restart timer switch. A quick tap turns the timer on and the pre-programmed timer countdown begins. The timer turns off automatically when the specified time period has elapsed. While the wall timer is on, the user can turn it off with a quick tap. Alternatively, a sustained two-second press while the power is running will restart the timer countdown, extending the run time.

The HNS220TD has a number of bonus features that provide additional flexibility. The configurable switch mode means that power to the load can be either ON or OFF during timer operation. The blue LED indicates the device status; this can be set to ON or OFF when power is ON, and ON or OFF when power is OFF. When the timer is in operation, the LED will blink every 5 seconds. During the last 10 seconds of operation the LED will flash, indicating imminent time out.

Designed and engineered in Australia.

Applications and Compatibility

The HNS220TD Advanced Wall Timer Switch is specifically designed for high power applications and can be used as a timer for pool pumps, spa pumps, commercial lighting, car park lighting, exhaust fans and heaters.

This advanced wall timer is perfect for retrofitting existing installations. It is an improved direct replacement for the Clipsal 2031VETR3 and the 31VETR3, as it can switch 8A of motor load and can also operate as a restart timer.

Fits in a one gang Australian face plate style switch mechanism. Compatible with Clipsal or HPM wall plates. Supplied with choice of buttons and a face plate.

The HNS220TD is multi-way switching capable using mains rated momentary action switches-refer to the product user manual for further information.

Operating Conditions

Operating Voltage: 230 - 240V a.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 10AX
Timer Range: 10 seconds to 15 hours
Timer Accuracy: +/- 0.5%
Terminals: Screw Terminals suit 1.5mm2 to 4.0mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

WARNING: The HNS220TD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For load compatibility, operating instructions and important safety warnings, refer to the product User Manual.

$127.05  Inc Tax
$133.47
Per Page      1 - 9 of 9
  • 1