Special Offers
CABAC Insulation Tape is a high quality product that maintains its elasticity and adhesion long term. The tape is made of PVC and is resistant to acid, alkali, solvents, cold, and is flame retardant. This tape can be used for basic insulation, as well as harnessing and general wire wrapping.
Technical Data
Nominal reel dimensions: Length 20m ,18mm wide
Tape backing: PVC
Adhesive: Rubber based
Thickness: 0.13mm
Adhesion: 1.8N/cm▓
Tensile strength: 28.5N/cm▓
Elongation: < 160%
Breakdown voltage: 8kV
Dialectic Strength: 42kV/mm
Rainbow Pack Includes:
ò 2 x Red
ò 2 x Blue
ò 2 x White
ò 3 x Black
ò 1 x Yellow/ Green
HDMI V1.4 M-M Type A to Type C Cable - 1M
HDMI is fully backward compatible with PCs, displays and consumer electronics devices incorporating the Digital Visual Interface (DVI) standard.
HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio, and with 10.2 Gbps of bandwidth, HDMI can accommodate future enhancements and requirements.
The HDMI V1.4 M-M Type A to Type C Cable is mostly used with portable devices such as digital cameras, mobile phone, MP3 players and portable storages.
HDMI V1.4 M-M Type A to Type C Cable Features
ò Adds high-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled devices without a separate Ethernet cable
ò 3D û defines input/output protocols for major 3D video formats, paving the way for true 3D gaming and 3D home theatre applications
ò 4K supportû enables video resolutions far beyond 1080p, supporting next-generation displays that will rival the Digital Cinema systems used in many commercial movie theatres
ò Additional colour spaces û adds support for additional color models used in digital photography and computer graphics
Specification:
Connector A
- Type: 19 pin Male Type-C Mini
- Terminals: Gold Plated
- Connector Dimensions: 6.4mm x 2.8mm
Connector B
- Type: 19 pin Male Type-A
- Terminals: Gold Plated
- Connector Dimensions: 13.9mm x 4.45mm
The HNS220TD can operate as a timer switch or restart timer switch. A quick tap turns the timer on and the pre-programmed timer countdown begins. The timer turns off automatically when the specified time period has elapsed. While the wall timer is on, the user can turn it off with a quick tap. Alternatively, a sustained two-second press while the power is running will restart the timer countdown, extending the run time.
The HNS220TD has a number of bonus features that provide additional flexibility. The configurable switch mode means that power to the load can be either ON or OFF during timer operation. The blue LED indicates the device status; this can be set to ON or OFF when power is ON, and ON or OFF when power is OFF. When the timer is in operation, the LED will blink every 5 seconds. During the last 10 seconds of operation the LED will flash, indicating imminent time out.
Designed and engineered in Australia.
Applications and Compatibility
The HNS220TD Advanced Wall Timer Switch is specifically designed for high power applications and can be used as a timer for pool pumps, spa pumps, commercial lighting, car park lighting, exhaust fans and heaters.
This advanced wall timer is perfect for retrofitting existing installations. It is an improved direct replacement for the Clipsal 2031VETR3 and the 31VETR3, as it can switch 8A of motor load and can also operate as a restart timer.
Fits in a one gang Australian face plate style switch mechanism. Compatible with Clipsal or HPM wall plates. Supplied with choice of buttons and a face plate.
The HNS220TD is multi-way switching capable using mains rated momentary action switches-refer to the product user manual for further information.
Operating Conditions
Operating Voltage: 230 - 240V a.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 10AX
Timer Range: 10 seconds to 15 hours
Timer Accuracy: +/- 0.5%
Terminals: Screw Terminals suit 1.5mm2 to 4.0mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
WARNING: The HNS220TD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For load compatibility, operating instructions and important safety warnings, refer to the product User Manual.
Details
Width: 7.6mm
Length: 203mm
Tensile Strength: 55kg
Pack Qty: 100/pack
Details
Width: 7.6mm
Length: 380mm
Tensile Strength: 55kg
Pack Qty: 100/pack
- 610 standard wall mount socket
- Suitable for wall mount
- Popular beige colour to suits most decors
- Easy installation and provides secure connection
General Purpose Amplifier 2 Circuit 8-PDIP
The NE5532P are high-performance operational amplifiers combining excellent dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.
Specification:
Packaging | Tube |
Amplifier Type | General Purpose |
Number of Circuits | 2 |
Output Type | - |
Slew Rate | 9V/µs |
Gain Bandwidth Product | 10MHz |
Current - Input Bias | 200nA |
Voltage - Input Offset | 500µV |
Current - Supply | 8mA |
Current - Output / Channel | 38mA |
Voltage - Supply, Single/Dual (±) | ±5V ~ 15V |
Operating Temperature | 0°C ~ 70°C |
Mounting Type | Through Hole |
Package / Case | 8-DIP (0.300", 7.62mm) |
Supplier Device Package | 8-PDIP |
The HNS210TD is configured using eight DIP switches, a quick and simple method that allows installers to tailor the timer function precisely to their client's needs. This unit supports a wide range of timer duration options, enabled by a switch which determines whether the time-out is set in long (4-minute) or short (15-second) increments. This means that timer duration can range from 15 seconds to over 4 hours. Another switch allows for the installer to select what action results when the button is pushed while the load is on. Using this setting, the HNS210TD can be programmed to restart the timer when the button is pushed during operation, thus extending the run time. Alternatively, the button can be programmed to turn off the load upon a subsequent push, cutting the run time short.
Applications and Compatibility
This timer is suitable for the majority of applications, but is particularly well suited for fan motors. The HNS210TD is multi-way switching capable, refer to the product Datasheet for further information.
Compatible with HPM and Clipsal style wall plates. Suitable push buttons are provided for a perfect fit.
Operating Conditions
Operating Voltage: 230 - 240V a.c. 50Hz*
Operating Temperature: 0 to +50 degrees Celsius
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 10AX
Timer Range: 15 seconds to 252 minutes
Timer Accuracy: +/- 10%
Terminals: Screw Terminals suit 1.5mm2 to 4.0mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
*Not suitable to be driven by a DC-AC inverter.
The HNS210TD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product User Manual.
Scotch« Vinyl Mastic Tape VM is a rubber based mastic laminated to an all-weather 0.18mm vinyl. It provides double duty protection in one wrap. Vinyl Mastic Tape seals out moisture and protects against corrosion without the need for heating tools or multiple tapes.
Technical Data
Pad size: 114x165x3.2mm thick
Applications (600 Volt Maximum)
ò Bolted connections
ò Service drops
ò Traffic Signal wire connections
ò Transformer bushing protection
ò Padding bolted connections on a busbar
ò Terminal protection
ò Cable sealing
ò Secondary compression connections
This pair of pliers is manufactured to precise specification to produce a quality professional tool for the electrical artisan or engineer. Suitable for panel, installation and line work. The EVP220 fits easily into and withdraws from a tradesmen's belt pouch.
Professional Electricians Combo Pliers/Cutter Features
- Precision conductor cutting and crimping
- High leverage
- Top grade steel
- Scissor action cutter
- Not suitable for steel wire
- Use only on Copper or Aluminium
- Crimps uninsulated terminals up to 6mm2
- Soft slip proof moulded grips
NOT SUITABLE FOR CUTTING STEEL. Copper or Aluminium Conductors Only.
CABAC Combination Non-Ratchet Crimper 1.5-6Mm2
Low cost combination crimp tool for pre-insulated red, blue and yellow terminals, copper lugs and un-insulated terminalsIncludes cutter, bolt cutter and wire stripperSize: 1.5-6mm2For the handyman NOT for quality electrical installations
- 1