Integrated Circuits (ICs)
The TPS709 series of linear regulators are ultralow, quiescent current devices designed for power-sensitive applications.
The TCA0372 is a monolithic circuit intended for use as a power operational amplifier in a wide range of applications, including servo amplifiers and power supplies. No deadband crossover distortion provides better performance for driving coils.
Qty Breakdown:
Qty 2000 - DC 2011+
Qty 1898 - DC 2010+
General Purpose Amplifier 2 Circuit 8-PDIP
The NE5532P are high-performance operational amplifiers combining excellent dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage.
Specification:
Packaging | Tube |
Amplifier Type | General Purpose |
Number of Circuits | 2 |
Output Type | - |
Slew Rate | 9V/µs |
Gain Bandwidth Product | 10MHz |
Current - Input Bias | 200nA |
Voltage - Input Offset | 500µV |
Current - Supply | 8mA |
Current - Output / Channel | 38mA |
Voltage - Supply, Single/Dual (±) | ±5V ~ 15V |
Operating Temperature | 0°C ~ 70°C |
Mounting Type | Through Hole |
Package / Case | 8-DIP (0.300", 7.62mm) |
Supplier Device Package | 8-PDIP |
The MC3374 is perfect for narrowband audio and data applications up to 75 MHz which require extremely low power consumption. Battery-powered applications down to VCC = 1.1 V are possible. The MC3374 also includes an onboard voltage regulator, low battery detection circuitry, a receiver enable allowing a power down Sleep–Mode, two undedicated buffer amplifiers to allow simultaneous audio and data reception, and a comparator for enhancing FSK (Frequency Shift Keyed) data reception to 1200 baud.
• Low Supply Voltage: VCC = 1.1 to 3.0 Vdc
• Low Power Consumption: PD = 1.5 to 5.0 mW
• Input Bandwidth 75 MHz
• Excellent Sensitivity: 0.5 µVrms for 12 dB SINAD
• Voltage Regulator Available (Source Capability 3.0 mA)
• Receiver Enable to Allow Active/Standby Operation
• Low Battery Detection Circuitry
• Self Biasing Audio Buffer
• Data Buffer
• FSK Data Shaping Comparator
• Standard 32–Lead QFP Surface Mount Pack
Brand: Texas Instruments
The NJ88C33 is a synthesiser circuit fabricated on Mitel Semiconductor's 1.4 micron CMOS process, assuring very high performance. It is I2C compatible and can also be programmed at up to 5MHz. It contains a 16-bit R counter, a 12-bit N counter and a 7-bit A counter. A digital phase comparator gives improved loop stability with current source outputs to reduce loop components. A voltage doubler is provided for the loop driver to improve control voltage range to the VCO when operating at low supply voltages.
FEATURES
■ Easy to Use
■ Low Power Consumption (15mW)
■ Single Supply 2.5V to 5.5V
■ Digital Phase Comparator with Current Source Outputs
■ Serial (I2C Compatible) Programming, 5MHz max
■ Channel Loading in 8µs
■ 150MHz Input Frequency Without Prescaler at 4.5V (52MHz at 2.7V)
■ Standby Modes ■ Use of Two-Modulus Prescaler is Possible
APPLICATIONS
■ Cordless Telephones (CT2, DECT)
■ Cellular Telephones (GSM, PCN, ETACS)
■ Hand Held Marine Radios
■ Sonarbuoys
■ Video Clock generators
HM514400CS6 Hitachi DRAM 1,048,576 Word x 4-bit, 20pin SOJ, Dynamic RAM - 20 Pcs
*** Image is for Reference only ***
Manufacturer : Hitachi
Part Number: HM514400CS6
Item: -CMOS DRAM
Features:
-1,048,576 Word x 4-bit
-20 pin SOJ
-Date Code: 99xy (x,y can be any integer between 0 and 9)
- 1