S-Click

Sort By:  
Mech Booster Relay 3-Wire HNS010RL
S-Click Mech Booster Relay 3-Wire 240V 10A HNS010RL (HNS010RL)
S-Click Mech Booster Relay 3-Wire 240V 10A HNS010RL

Used in conjunction with HNS440TM, HNS450TM or HNS460SW
Suitable for fans, motors and iron core ballasts
Can be normally open or normally closed
$98.38  Inc Tax
S-Click Remote Btn For Dimmers HNS020RB
S-Click Remote Btn For Dimmers And 3W Timers HNS020RB (HNS020RB)
Multiway switching provides another level of comfort and functionality for a range of spaces, including bedrooms, hallways and garages. S-Click Remote Buttons are a convenient and economical solution that provide multiway switching and dimming over standard wiring.

The HNS020RB is suitable for use with S-Click Digital Dimmer Switches, 3-Wire Timer Switches and 3-Wire Electronic ON/OFF Switches. Multiple Remote Buttons can be connected in parallel to a single dimmer or switch, provided that the total length of the remote connection does not exceed 50 metres.

Applications and Compatibility

The HNS020RB is designed for indoor use and is not rated for outdoor installation. Buttons to suit both Clipsal and HPM Style wall plates are included.

Compatible S-Click Dimmers: HNS610DT and HNS620DT
Compatible S-Click 3-Wire Timers: HNS440TM and HNS450TM
Compatible S-Click ON/OFF Mechs: HNS460SW

Note: Not for Mains Switching.

Operating Conditions

Operating Voltage: 220-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Compliance Standards: AS/NZS 60669.2.1, CISPR15
Power Rating: Based upon connected Dimmer or Timer
LED Indicator Colour: White
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS020RB is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product user manual.

$26.59  Inc Tax
S-Click 2-in-1 Programmable Light Switch Timer Mech
S-Click Minute Mech Timer 2-Wire 240V 1.7A HNS410TM (HNS410TM)
The S-Click HNS410TM is a 2-in-1 lighting timer switch that automatically turns lights off after a pre-determined time. Time delay can be set in minute increments from 1-60 minutes - perfect for areas that are frequently occupied for relatively short periods. Supporting both timer and non-timer functions, this unit also allows for lights to be manually turned off with a quick tap.

Our minute timer switch is ideal for domestic use and can be retrofitted to most installed lights. A blue LED indicates device status and gives an expiry warning within the last 10 seconds before the lights time-out. The timer settings are retained even after loss of power and can be configured to power up on or off after loss of mains power.

Programming your chosen off time couldn't be simpler. A sustained 10 second press of the button enters programming mode. Just tap the button once for each minute of run time you require, up to 60 minutes. Programming mode expires 10 seconds after the last tap, and the unit then commits your settings to memory. If you happen to press the button more than 60 times, the maximum run time of 60 minutes will be stored.

Applications and Compatibility

The HNS410TM is perfect for lighting in areas such as hallways, garages, laundries and wardrobes. All require adequate lighting but are generally not occupied for extended periods. Using a minute timer switch in these areas prevents the excess energy consumption caused by leaving lights on accidently.

The HNS410TM is compatible with HPM and Clipsal Style wall plates. Multi-way switching capable using 240V normally open momentary switches-refer to the product datasheet for more information.
Not suitable for fans, motors or iron core ballasts.

Operating Conditions

Operating Voltage: 230 - 240V a.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Compliance Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 400VA
Minimum Load: 10VA
Maximum Current capacity: 1.7A
Terminals: Screw Terminals suit 0.5mm2 to 1.5mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS410TM is to be installed as part of a fixed wire electrical installation. By law, such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product User Manual.

$98.65  Inc Tax
S-Click Rotary Dig Dimmer 2-Wire 240V 350V HNS630DT (HNS630DT)

The S-Click HNS630DT digital dimmer is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS630DT provides deep-dimming to zero on most lamps. A separate switch is required for ON/OFF control.

This 2-wire rotary dimmer features programmable minimum brightness, patented ripple tone rejection and has the advantage of being suitable for dual switching. This makes our HNS630DT the perfect choice for dimmable LED lighting.

Applications and Compatibility

Suggested uses include incandescent, Dichroic 12V, CFL and most dimmable lighting. Compatible with S-Click 3-Wire Timers and Switches.

The HNS630DT is suitable for dual switching.

Knobs included to suit Clipsal and HPM style wall plates. Also suitable with PDL 600 Series, use our adaptor HNSPDLCONV.

The HNS630DT is designed for indoor use. It is not rated for outdoor installation. NOT SUITABLE FOR FANS AND MOTORS.

Operating Conditions

Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS630DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.

$73.50  Inc Tax
Rotary Switch Dig Dimmer HNS620DT
Rotary Switch Dig Dimmer 2-W 240V 350V HNS620DT (HNS620DT)

S-Click Rotary Digital Dimmer with Built-In ON/OFF Switch

The HNS620DT dimmer switch is simple to use and employs a familiar rotary-style dimming method. Turning the knob clockwise will brighten the lights and turning the knob anti-clockwise will decrease brightness. The wider range capability of the HNS620DT provides deep-dimming to zero on most lamps. This versatile 2-in-1 unit also provides push-button ON/OFF control and is the perfect solution for dimmable LED lighting and dimmable compact fluorescent lamps.

The HNS620DT is equipped with timed dimming, a convenient bonus feature that automatically dims or brightens lighting. A double tap while lighting is ON will gradually dim lighting over 30 minutes before turning off. Conversely, a double tap when lighting is off will gradually increase brightness to full over 30 minutes. The LED indicator will blink every 5 seconds during timed dimming. The countdown can be cancelled at any time with a sustained 2-second press of the button.

Applications and Compatibility

The HNS620DT is designed for indoor use. It is not rated for outdoor installation. Suggested uses include LED & CFL lighting. NOT SUITABLE FOR FANS AND MOTORS.

For Multi-way dimming and ON/OFF, use the HNS020RB Remote Button.

Knobs included to suit CABAC, Clipsal and HPM style wall plates. Also suitable with PDL 600 Series, use our adaptor HNSPDLCONV.

Operating Conditions

Operating Voltage: 230-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certified Standard: AS/NZS 60669.2.1, CISPR15
Maximum Load: 350W
Minimum Load: 1W
Maximum Current capacity: 1.5A
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

The HNS620DT is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. No more than one dimmer can be connected to the same lamp. For operating instructions, important safety warnings and more information, refer to the product User Manual.

$77.10  Inc Tax
Per Page      1 - 5 of 5
  • 1