Latest Products
-
AXK500147BN1 Board to Board SMT Socket Connector 100 POS 0.5mm
$3.85 Inc Tax -
TPS70933DBVR IC REG LINEAR 3.3V 150MA SOT23-5
$1.19 Inc Tax -
On Semiconductor Zener Diode 1SMB5929BT3G 15V 3W 2 Pins, 150 °C
$0.50 Inc Tax -
Phoenix Contact Fixed Terminal Blocks 2P 5mm
$2.19 Inc Tax
S-Click Remote Btn For Dimmers And 3W Timers HNS020RB
The HNS020RB is suitable for use with S-Click Digital Dimmer Switches, 3-Wire Timer Switches and 3-Wire Electronic ON/OFF Switches. Multiple Remote Buttons can be connected in parallel to a single dimmer or switch, provided that the total length of the remote connection does not exceed 50 metres.
Applications and Compatibility
The HNS020RB is designed for indoor use and is not rated for outdoor installation. Buttons to suit both Clipsal and HPM Style wall plates are included.
Compatible S-Click Dimmers: HNS610DT and HNS620DT
Compatible S-Click 3-Wire Timers: HNS440TM and HNS450TM
Compatible S-Click ON/OFF Mechs: HNS460SW
Note: Not for Mains Switching.
Operating Conditions
Operating Voltage: 220-240Va.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Compliance Standards: AS/NZS 60669.2.1, CISPR15
Power Rating: Based upon connected Dimmer or Timer
LED Indicator Colour: White
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
The HNS020RB is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product user manual.