Tools

The widest range of premium tool products

Sort By:  
Hand Crimper HF2
BRASS TERM CRIMPER 0.75-6MM2 ROLL CRIMP (HF2)
This low cost brass terminal crimper is designed to crimp quick connectors type (QCB or MTB type) 0.75 - 6mm2.

The crimp achieves a roll crimp that supports the insulation and crimps the wire.

This type of crimper is not suitable for flag terminals.
$144.79  Inc Tax
Hand Crimper tool HNKE7
CABAC BOOTLACE CRIMPER 16-35MM2 (HNKE7)
Ratchet crimper for crimping bootlace ferrules (BLP) and uninsulated sleeves 16-35 mm2.
> Designed to crimp the large end of the bootlace range
> Ratchet controlled for crimp consistency
> Serrated crimp surface creating an enhanced grip
$142.60  Inc Tax
HNKE10 Hand Crimper
Cabac Die-Less Bootlace Crimper 0.08-10Mm2 HNKE10 (HNKE10)
The HNKE10 tool is the mid range tool in the die-less tool range, covering 0.08 to 10mm2.

The principal of the tool is that it has four faces that simultaneously move inward as the tool is closed, creating a square crimped pin with serrations. This action creates a self-adjusting tool, which crimps over a large range. To crimp, simply insert the ferrule and squeeze the handles, and the tool does the rest. The tool is ratchet controlled for crimp consistency, and the ratchet has 9 adjustment positions, to compensate for tool wear.

NOTE: Please ensure this tool is well oiled to ensure correct operation.
Out of Stock
$139.30  Inc Tax
Cabac Electrical Pliers 1000V - 205mm HVEP205B
Cabac Electrical Pliers 1000V - 205mm HVEP205B (HVEP205B)
These handy pliers are made of drop forged vanadium steel with 1000V insulated handles.

They feature a serrated nose grip and beveled side-cutting blades.

Note: This product has been tested for working at voltages up to 1000V. To be in compliance with the standard IEC 60900, Clause 5.5 - Dielectric tests.
Testing requires tools are subjected to 10 000V. Products are designed and manufactured to conform to the requirements of the standard AS/NZS 4056.
Out of Stock
$35.29  Inc Tax
Cabac Screwdriver 1000V Phillips HVS5-100P
Cabac Screwdriver 1000V 100mm 2 Phillips (HVS5-100P)
Screwdriver Features
- Handles are made from two materials, which provide a soft grip, with a sturdy handle.
- The blade is made from high-grade alloy steel
- The range can be purchased individually or in sets 

Standards Compliance

- Designed, tested and compliant to VDE, GS and the EN/IEC60900 standard for full 1000V protection
- The test process for these screwdrivers is a 10,000V immersion test in a water bath as part of the manufacturing process. At this voltage there must be insignificant current leakage, or tracking

Technical Data

Head Size: #2
Shaft Length: 100mm
Overall Length: 215mm
Weight: 97g

$18.89  Inc Tax
Cabac Screwdriver 1000V HVS5-150S
Cabac Screwdriver 1000V 150 X 6.5Mm Slotted HVS5-150S (HVS5-150S)
Screwdriver Features
- Handles are made from two materials, which provide a soft grip, with a sturdy handle
- Blade is made from high grade alloy steel
- Range can be purchased individually or in sets


Standards Compliance

- Designed, tested and compliant to VDE, GS and the EN/IEC60900 standard for full 1000V protection
- The test process for these screwdrivers is a 10,000V immersion test in a water bath as part of the manufacturing process. At this voltage there must be insignificant current leakage, or tracking

Technical Data

Shaft Length: 150mm
Overall Length: 265mm
Weight: 118g

$18.89  Inc Tax
Cabac Screwdriver Set - Precision 7 Piece PSDK1
Cabac Screwdriver Set - Precision 7 Piece PSDK1 (PSDK1)
Precision Screwdriver Kit 7 Piece

This kit contains seven precision screwdrivers. The handles of the drivers have swivel tops to make them easy to use.

Kit contains:
Flat 1, 2, and 3mm
Philips 00 and 0
Torq T15 and T20

Technical Data
Size130 x 170 x 20 mm
Weight 920 g

Ordering Information
Part No. PSDK1
$52.44  Inc Tax
Cabac Imperial Allen Key Set KAKTI
Cabac Imperial Allen Key Set KAKTI (KAKTI)
Imperial Allen key set, comprised of 10 keys in popular sizes

Sizing

Imperial Allen key sizes included: 1/16", 5/64", 2/32", 1/18", 5/32", 3/16", 1/4", 5/16", 3/8"
Weight: 489g
Length: 255mm

$34.79  Inc Tax
Cabac Screwdriver Kit 8 Piece HVSDK6
Cabac 1000V Screwdriver Kit 8 Piece HVSDK6 (HVSDK6)
This eight piece set contains the most common drivers and an electrical test screwdriver and is supplied in a plastic carry case.

Screwdriver Set 1000V Features
- Handles made from two materials, which provides a soft grip, with a sturdy handle
- Blade is made from high grade alloy steel
- Range can be purchased individually or in sets

Kit Contains

Slotted screwdriver - 3.5 x 75mm
Slotted screwdriver - 4.0 x 100mm
Slotted screwdriver - 5.5 x 125mm
Slotted screwdriver - 6.5 x 150mm
Phillips screwdriver - #0 x 75mm
Phillips screwdriver - #1 x 80mm
Phillips screwdriver - #2 x 100mm
Electrical Test Screwdriver 120-250V - 140mm

Safety Compliance

Designed, tested and compliant to VDE, GS and the EN/IEC60900 standard for full 1000V protection. The test process for these screwdrivers is a 10,000V immersion test in a water bath as part of the manufacturing process. At this voltage there must be insignificant current leakage, or tracking.

$45.30  Inc Tax
Cabac Screw Driver Set 8Pce 1000V Vde HVSDK5
Cabac Screw Driver Set 8Pce 1000V Vde HVSDK5 (HVSDK5)

This eight piece set contains the most common drivers and an electrical test screwdriver.

Screwdriver Set 1000V Features
- Handles made from two materials, which provides a soft grip, with a sturdy handle
- Blade is made from high grade alloy steel
- Range can be purchased individually or in sets

Kit Contains

Slotted screwdriver - 3.5 x 75mm
Slotted screwdriver - 4.0 x 100mm
Slotted screwdriver - 5.5 x 125mm
Slotted screwdriver - 6.5 x 150mm
Phillips screwdriver - #0 x 75mm
Phillips screwdriver - #1 x 80mm
Phillips screwdriver - #2 x 100mm
Electrical Test Screwdriver 120-250V - 140mm

Safety Compliance

Designed, tested and compliant to VDE, GS and the EN/IEC60900 standard for full 1000V protection. The test process for these screwdrivers is a 10,000V immersion test in a water bath as part of the manufacturing process. At this voltage there must be insignificant current leakage, or tracking.

$50.15  Inc Tax
Cabac Electrical Pliers 1000V - 230mm HVEP230HL
Cabac Electrical Pliers 1000V - 230mm HVEP230HL (HVEP230HL)
These pliers are truly professional, for the discerning user

Features
- Made from a special high grade steel
- Light weight with an off-centre swivel that gives a high leverage action
- Ultra hard cutting blade will cut piano wire (up to 2.5mm) and nails (up to 4.2mm), without any damage
- 2x crimping dies for lugs and terminal up to 6mm2

Note: This product has been tested for working at voltages up to 1000V. To be in compliance with the standard IEC 60900, Clause 5.5 - Dielectric tests.
Testing requires tools are subjected to 10 000V. Products are designed and manufactured to conform to the requirements of the standard AS/NZS 4056.
$43.65  Inc Tax
Cabac Electrical Pliers 1000V - 175Mm HVEP175B
Cabac Electrical Pliers 1000V - 175Mm HVEP175B (HVEP175B)
- Drop forged in vanadium steel
- 1000V insulated handles
- Serrated nose grip and bevelled side-cutting blades

Note: This product has been tested for working at voltages up to 1000V. To be in compliance with the standard IEC 60900, Clause 5.5 - Dielectric tests.
Testing requires tools are subjected to 10 000V. Products are designed and manufactured to conform to the requirements of the standard AS/NZS 4056.
$37.99  Inc Tax
Cabac Long Nose Plier 125Mm KLNP125B
Cabac Long Nose Plier 125Mm KLNP125B (KLNP125B)
- For use in fine electrical data and electronic work
- Spring action for ease of use
- Two colour cushioned handle, with finger protection
$33.30  Inc Tax
Cabac long nose plier HVLNP205B
Cabac Long Nose Pliers 1000V Rated 205Mm HVLNP205B (HVLNP205B)
- Drop forged vanadium steel
- 1000V insulated handles
- Long serrated inside jaws and bevelled side cutting blades

Note: This product has been tested for working at voltages up to 1000V. To be in compliance with the standard IEC 60900, Clause 5.5 - Dielectric tests.
Testing requires tools are subjected to 10 000V. Products are designed and manufactured to conform to the requirements of the standard.
$37.30  Inc Tax
Long Nose Plier HVLNP150B
Cabac Long Nose Pliers 1000V Rated 150Mm HVLNP150B (HVLNP150B)
- Drop forged vanadium steel
- 1000V insulated handles
- Long serrated inside jaws and beveled side cutting blades

Note: This product has been tested for working at voltages up to 1000V. To be in compliance with the standard IEC 60900, Clause 5.5 - Dielectric tests.
Testing requires tools are subjected to 10 000V. Products are designed and manufactured to conform to the requirements of the standard.
$36.40  Inc Tax
Cabac Locking Plier KLP250
Cabac Locking Plier 250mm - 10 Inch KLP250 (KLP250)
CABAC's Locking Plier is 250mm (10") long and is Professional Quality, hardened and tempered. The pliers feature a welded top jaw, drop forged jaw and curved jaws with wire cutter.
$37.10  Inc Tax
Electrician Plier EVP220
Cabac Professional Electricians Pliers/Cutter (EVP220)
The EVP220 is a high quality pair of pliers with a precision conductor cutter and a 2.5- 6mm2 crimp die.

This pair of pliers is manufactured to precise specification to produce a quality professional tool for the electrical artisan or engineer. Suitable for panel, installation and line work. The EVP220 fits easily into and withdraws from a tradesmen's belt pouch.

Professional Electricians Combo Pliers/Cutter Features
- Precision conductor cutting and crimping
- High leverage
- Top grade steel
- Scissor action cutter
- Not suitable for steel wire
- Use only on Copper or Aluminium
- Crimps uninsulated terminals up to 6mm2
- Soft slip proof moulded grips

NOT SUITABLE FOR CUTTING STEEL. Copper or Aluminium Conductors Only.
$39.49  Inc Tax
$47.25
Professional electrical Plier EP220
Cabac Professional Electrical Pliers EP220 (EP220)
These professional electricians pliers are suitable for use in panel, installation wiring and line work.

HIGH QUALITY pliers with long precision cutting blades, a round bar gripper, a flat gripper at the front end and a crimper behind the fulcrum. The EP220 fits easily into and withdraws from a tradesmen's belt pouch.

Professional Electrical Pliers Features
- General purpose use
- Precise and patterned flat gripping tip
- Serrated round-bar gripper
- Long, precision cutting blades
- High leverage
- Non-slip plastic moulded hand grips
- Cuts nails and screws
- Cuts steel wire
$65.25  Inc Tax
Hand Ratchet Crimper K26
COMBINATION HAND CRIMPER 1.5-16MM2 K26 (K26)
Low cost ratchet crimper crimps copper lugs and uninsulated terminals 1.5-16 mm2. A ratchet operation ensures correct crimp and a 'W' crimp for large crimp range.
$139.30  Inc Tax
Hand Crimper Tool
Combination Non-Ratchet Crimper 1.5-6Mm2 (K10/3)

CABAC Combination Non-Ratchet Crimper 1.5-6Mm2

Low cost combination crimp tool for pre-insulated red, blue and yellow terminals, copper lugs and un-insulated terminalsIncludes cutter, bolt cutter and wire stripperSize: 1.5-6mm2For the handyman NOT for quality electrical installations

$35.59  Inc Tax
$39.05
Per Page      1 - 20 of 21