Wall Timers

Sort By:  
S-Click Advanced Wall Timer Switch 3-Wire HNS220TD
S-Click Advanced Wall Timer Switch 3-Wire HNS220TD (HNS220TD)
The HNS220TD Advanced Wall Timer is a flexible, high current timer switch perfect for devices that are required to run for a fixed amount of time. This wall timer offers adjustable time-out ranging from 10 seconds to 15 hours, with easy and accurate programming using DIP switches. The HNS220TD can be used as a pool pump timer, exhaust fan timer, heater timer, or for a range of other high-power applications.

The HNS220TD can operate as a timer switch or restart timer switch. A quick tap turns the timer on and the pre-programmed timer countdown begins. The timer turns off automatically when the specified time period has elapsed. While the wall timer is on, the user can turn it off with a quick tap. Alternatively, a sustained two-second press while the power is running will restart the timer countdown, extending the run time.

The HNS220TD has a number of bonus features that provide additional flexibility. The configurable switch mode means that power to the load can be either ON or OFF during timer operation. The blue LED indicates the device status; this can be set to ON or OFF when power is ON, and ON or OFF when power is OFF. When the timer is in operation, the LED will blink every 5 seconds. During the last 10 seconds of operation the LED will flash, indicating imminent time out.

Designed and engineered in Australia.

Applications and Compatibility

The HNS220TD Advanced Wall Timer Switch is specifically designed for high power applications and can be used as a timer for pool pumps, spa pumps, commercial lighting, car park lighting, exhaust fans and heaters.

This advanced wall timer is perfect for retrofitting existing installations. It is an improved direct replacement for the Clipsal 2031VETR3 and the 31VETR3, as it can switch 8A of motor load and can also operate as a restart timer.

Fits in a one gang Australian face plate style switch mechanism. Compatible with Clipsal or HPM wall plates. Supplied with choice of buttons and a face plate.

The HNS220TD is multi-way switching capable using mains rated momentary action switches-refer to the product user manual for further information.

Operating Conditions

Operating Voltage: 230 - 240V a.c. 50Hz
Operating Temperature: 0 to +50 degrees Celsius
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 10AX
Timer Range: 10 seconds to 15 hours
Timer Accuracy: +/- 0.5%
Terminals: Screw Terminals suit 1.5mm2 to 4.0mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.

WARNING: The HNS220TD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For load compatibility, operating instructions and important safety warnings, refer to the product User Manual.

$127.05  Inc Tax
$133.47
S-Click Wall Timer Switch 230Vac 10A HNS210TD
S-Click Wall Timer Switch 230Vac 10A HNS210TD (HNS210TD)
The S-Click HNS210TD Wall Timer Switch is a high current 10A timer switch suitable for a range of applications, including motor loads up to 8A. This unit has selectable operating modes that allow it to act as an ON/OFF timer switch or a restart timer switch as required.

The HNS210TD is configured using eight DIP switches, a quick and simple method that allows installers to tailor the timer function precisely to their client's needs. This unit supports a wide range of timer duration options, enabled by a switch which determines whether the time-out is set in long (4-minute) or short (15-second) increments. This means that timer duration can range from 15 seconds to over 4 hours. Another switch allows for the installer to select what action results when the button is pushed while the load is on. Using this setting, the HNS210TD can be programmed to restart the timer when the button is pushed during operation, thus extending the run time. Alternatively, the button can be programmed to turn off the load upon a subsequent push, cutting the run time short.

Applications and Compatibility

This timer is suitable for the majority of applications, but is particularly well suited for fan motors. The HNS210TD is multi-way switching capable, refer to the product Datasheet for further information.
Compatible with HPM and Clipsal style wall plates. Suitable push buttons are provided for a perfect fit.

Operating Conditions

Operating Voltage: 230 - 240V a.c. 50Hz*
Operating Temperature: 0 to +50 degrees Celsius
Certification Standard: CISPR15, AS/NZS 3100, AS/NZS 60669.2.1
Maximum Load: 10AX
Timer Range: 15 seconds to 252 minutes
Timer Accuracy: +/- 10%
Terminals: Screw Terminals suit 1.5mm2 to 4.0mm2 stranded (bootlace terminal recommended)
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
*Not suitable to be driven by a DC-AC inverter.

The HNS210TD is to be installed as part of a fixed wire electrical installation. By law such installations must be made by an electrical contractor or similarly qualified person. For operating instructions and important safety warnings, refer to the product User Manual.

$142.95  Inc Tax
$155.05
Per Page      1 - 2 of 2
  • 1